My Amplified Bazooka is shutting off at low volume levels.
|
This is usually a problem related to the Auto
Turn-On feature. When the source unit's volume is turned down, thevolume
level will sometimes drop below the On Threshold of the Auto Turn-On
circuit. For this reason we list theAuto Turn-on as the last option
when installing an Amplified Bazooka.
The best way to eliminate this situation is
to place the Auto Turn-On Jumper in the Off position. Then run a
remote wire from the Auto Antenna or Remote Out of your source unit
to the Orange Wire on the Amplified Bazooka. If your source unit
does not have a Remote Output then you want to find an Ignition
or Accessory source from the fuse block. It is always best to use
the SAS On/Off Switch to control your Amplified Bazooka. Information
about all Remote Turn-On options is listed under Amplified Bazooka
Installation and Wiring.
If you do not have an SAS On/Off Switch, they
are available from most SAS Authorized Dealers or you can order
one direct from SAS. Contact the SAS Customer Service Department
at (800) THE-TUBE to place an order.
|